How to set up your Remote Control

The Nordlux Smart Remote Control is a good addition to your Nordlux Smart lights, as you gain an additional mode of control.

Below you will find a step-by-step guide on how to connect and set up your Remote Control.

Reset your devices

When experiencing connection issues here, a common solution is to reset either the bulb or the Remote Control. You can reset the bulb by turning it on and off 4 times, until it starts to blink, and with the Remote Control it can be done by pressing the reset button on the back 3 times with an interval of 2 seconds between each press. To access the setting mode, however, hold the reset button in for 5 seconds.

Need further help?

If resetting your devices do not solve the issue you are having, visit our "frequently asked questions"-page by following the link below.

Explore "frequently asked questions" ➔