The Nordlux Smart Remote Control is a good addition to your Nordlux Smart lights, as you gain an additional mode of control. Below you will find a step-by-step guide on how to connect and set up your Remote Control.
|
Step 4Open the Nordlux Smart app and tap the plus icon in the top right corner. Then tap the product category, where you should see your remote control pop up. Connect it. Check the reset instructions if the remote control doesn't show up |
|
Step 5Expand the menu by clicking on the three horisontal lines in the left top corner. Find Remote Control on the list and click on it. Enter the Remote Control overview by clicking on the Nordlux Remote Control.
|
|
Step 6Click on "settings". To enter the settings you need to hold in the setup button on the back of the Remote Control for 5 seconds.
|
|
Step 7Under settings, connect each button on the Remote Control to a desired action. The numbers are for the lights you wish to control, while the buttons with an "M" are for the moods. |
Reset your devicesWhen experiencing connection issues here, a common solution is to reset either the bulb or the Remote Control. You can reset the bulb by turning it on and off 4 times, until it starts to blink, and with the Remote Control it can be done by pressing the reset button on the back 3 times with an interval of 2 seconds between each press. To access the setting mode, however, hold the reset button in for 5 seconds.
|